Code: RNTWSU500
Dries in 2 hours - For use on brick, concrete, stone and wood - Only requires one coat - Stops freeze thaw damage - Use on brick, concrete and stone - Dries in 2 hours - Apply directly to damp surfaces
£26.44 Incl. VAT
Lichfield Stock:
In Stock
Thompson's One Coat Water Seal is an advanced silicone micro emulsion that can be applied to exterior brick and stonework which is then absorbed by the material's surface to prevent water from penetrating the material. The long-lasting weather protection seal has been formulated with a unique water based combination of hydrophobic waxes and alykl polysiloxane resin.
To maintain water repellency, you will need to re-treat the area of application periodically. The frequency of re-treatment will vary depending on the exposure, type and nature of the treated material, as well as the weather conditions that they are exposed to. Thompson's One Coat Water Seal will cover approximately 4m² per litre; this is dependent on the porosity and texture of the surface you intend to treat. In normal conditions, Thompson's Water Seal will dry in two hours; like coverage, drying time is also dependent on the texture and type of surface you are treating.
| Coverage | Thompson’s One Coat Water Seal will cover approximately 4m² per litre. Coverage will vary depending on the texture & type of surface you’re coating. | Odour | Mild, pleasant odour. |
|---|---|---|---|
| Storage | Protect from frost, Store above 5°C. | Appearance | Milky; clears immediately on application. |
| Viscosity | Very low to optimise penetration. | Flash Point | Above 61°C. |
| VOC Content | Low 0.30%-7.99%. |
