Setcrete™ Level-Smart is designed for preparing sound internal subfloors prior to the installation of new floorcoverings and can be applied at thicknesses from 2-30mm.
Setcrete™ Level-Smart is designed for preparing sound internal subfloors prior to the installation of new floorcoverings and can be applied at thicknesses from 2-30mm. It is particularly suitable for direct application over old adhesive residues – such as bitumen and carpet tile tackifiers – without the need for priming. Its fast setting characteristics enable a walk-on time of just 90 minutes and new floorcoverings can be installed from 4 hours.
Setcrete™ Level-Smart is suitable for use over a wide range of other subfloor types including sand/cement screeds, concrete, granolithic, terrazzo, asphalt, steel, epoxy and polyurethane resins, ceramic and quarry tiles.
FAQs
Do I need to remove old adhseive residues before laying a levelling compound?
For most floor levellers that is the case. However Setcrete Level-Smart is a specially designed compound for use over adhesive residues, saving time and effort. Setcrete Level-Smart can be applied directly over residues such as bitumen, carpet tile tackifiers, carpet adhesives and similar products, providing that any loose material has been removed. The mechanical removal of such residues can be costly and time consuming, but a product like Setcrete Level-Smart is the answer. It doesn't even need priming prior to application.
