Code: BP0ST0600K2A
Coloured To Provide Coverage Control - Dries from 20-30 minutes at 20°C on absorbent subfloors - General Purpose Primer for both Absorbent and Non-Absorbent Surfaces - Promotes Good Adhesion for Levelling Compounds - Refer to Data Sheets for usage information - General Purpose Primer for both Absorbent and Non-Absorbent Surfaces
£17.62 Incl. VAT
Lichfield Stock:
In Stock
Setcrete Acrylic Primer prevents unacceptably rapid drying of Setcrete Floor Levelling Compounds over absorbent subfloors and promotes adhesion to non-absorbent surfaces. It is suitable for use over normal underfloor heating installations and is coloured green to provide the user with visual control of coverage uniformity. Setcrete Acrylic Primer should be used on absorbent surfaces such as concrete, sand/cement screeds, plywood and hardboard. It should also be used on non-absorbent surfaces of terrazzo, power floated concrete, quarry and ceramic tiles, sound asphalt, well bonded epoxy and polyurethane coatings and minimal existing adhesive residue. Priming the subfloor prior to the installation of a floor levelling compound is crucial to gain a high adhesion strength between the levelling compound and substrate and to also gain a better surface finish.
- Coloured To Provide Coverage Control
- Dries from 20-30 minutes at 20°C on absorbent subfloors
- General Purpose Primer for both Absorbent and Non-Absorbent Surfaces
- Promotes Good Adhesion for Levelling Compounds
- Refer to Data Sheets for usage information
- General Purpose Primer for both Absorbent and Non-Absorbent Surfaces
