Code: BGBXGP11
Primer to reduce suction on very dry backgrounds. - A suction control primer to give a lower suction base on very dry backgrounds. - Applied by roller or brush onto the background, this can then be plastered when it has soaked into background and has dried. - Yellow in colour to aid identification of treated areas. - Typical coverage needed for 100m² is approx. 11 litres undiluted. 11 litres can also be diluted to give 300m² of coverage at a ratio of 1:2 and 600m² at a ratio of 1:5 with fresh water. - Lengthens the working time of plasters on very high suction backgrounds by helping them retain water, and minimises potential for adhesion failure caused by rapid dry-out
£117.72 Incl. VAT
Lichfield Stock:
Out of Stock
British Gypsum's Thistle GypPrime is a special primer used to modify surfaces to aid in retaining water and prevent adhesion failures when plastering extremely dry or high suction backgrounds. GypPrime provides you with extra working time as it reduces the suction base to prevent rapid drying. The primer is easy to apply by spray, roller or brush and has a distinct yellow colour to help you see which areas have been treated.When applied to extremely dry surfaces, the primer can be applied neat, and once diluted, the primer can cover up to 600 square metres.
- Primer to reduce suction on very dry backgrounds.
- A suction control primer to give a lower suction base on very dry backgrounds.
- Applied by roller or brush onto the background, this can then be plastered when it has soaked into background and has dried.
- Yellow in colour to aid identification of treated areas.
- Typical coverage needed for 100m² is approx. 11 litres undiluted. 11 litres can also be diluted to give 300m² of coverage at a ratio of 1:2 and 600m² at a ratio of 1:5 with fresh water.
- Lengthens the working time of plasters on very high suction backgrounds by helping them retain water, and minimises potential for adhesion failure caused by rapid dry-out
